We design and manufacture tanks that are indispensable for agitators.
The range of support is as follows.
| LAW | Class 1 pressure vessel, Class 2 pressure vessel, and Fire Service Act, Small. |
| Weight | Less than 4.8tons |
| Approximate weight | Jacketed tank 5㎥, single tank 15㎥ |
| Material | Stainless steel materials (SUS304, 316L, etc.), iron materials |
| Finish | Pickling, buffing (#200~#600), electrolytic polishing, passivation treatment, Teflon coating |
| Pressure | Less than 1.0MPa |
| Temperature | Less than 250℃ |
※For tanks that exceed the size that can be manufactured, we will respond including cooperating companies inside and outside the prefecture.
We are particularly good at polished products, and since polishers are stationed on site, it is possible to polish parts from the state while processing.
We have been highly evaluated by pharmaceutical and food-related companies for its good finish.
We can also respond in detail to the following other cases.
・Design, manufacture and installation of liquid preparation, refining, and filling equipment
・Design, manufacture and installation of mixing, liquid preparation, stock, and filling equipment
・Design and manufacture of equipment-related equipment: tanks, agitators, piping, and mounts
・Supports maintenance and modification after delivery